Fiber Optic Equipment
Parcourez les produits fiber optic equipment de nos fournisseurs vérifiés.
Fiber Optic Cable for FTTH Networks
This fiber optic cable is designed for Fiber to the Home (FTTH) applications. It provides high-speed data transmission and reliable performance for both indoor and outdoor network connections.
20G LiNbO3 External Modulator
This 20G modulator is a 12Gb/s LiNbO3 external modulator with low drive voltage. It features a built-in monitor PD for auto bias control and is suitable for high-speed telecommunications measurement equipment.
100G Coherent Photodetector Module
This 100Gb/s PM-QPSK integrated coherent receiver integrates signal and local oscillator polarization splitters with two matched 90° optical hybrids. It also features four high speed balanced detector pairs and four differential in/out linear TIAs with manual and automatic gain control in a single compact surface-mount package.
10 Gb/s PIN-TIA Photodetector Module
This module features a PIN photodetector, a low noise preamplifier and a connectorized single-mode fibre pigtail. It is optimized for use in 10 Gb/s long haul applications, either as a discrete device or within a transponder, using NRZ modulation.
C-Band Erbium-Doped Fiber Amplifier
This erbium-doped fiber amplifier operates on the C band. It features low noise, high output, and high gain.
C-Band Erbium-Doped Fiber Amplifier
This C-band erbium-doped fiber amplifier (EDFA) is available in pre-amplifier, booster, and in-line configurations. It features a user-friendly RS485 interface and is suitable for analog and digital CATV systems, long-distance transmission, LANs, and WANs.
C-Band Erbium-Doped Fiber Amplifier
The erbium-doped fiber amplifier operates on the C band and is available in pre-amplifier, booster, and in-line amplifier types. This amplifier features low noise figure, high output, and high gain.
Fiber Optic Fusion Splicer
This fiber optic fusion splicer is designed for precision splicing with a double core alignment structure for a higher success rate and lower loss. It features a 4.3 inch color LCD screen and rapid splicing and heating times.
MEMS Variable Optical Attenuator
This variable optical attenuator (VOA) utilizes a micro-electro-mechanical mechanism for optical power control. It features a compact design, simple construction, and excellent optical performance.
4x4 MEMS Fiber Optic Switch
The MEMS Latch Series 4x4 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. It features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed.
1x16 MEMS Optical Switch
This MEMS optical switch utilizes micro-electro-mechanical system (MEMS) technology to achieve low insertion loss. It is mainly used in optical cross and connection (OXC) systems, optical add/drop systems, and optical signal monitoring systems.
1x4 MEMS Fiber Optic Switch
The MEMS Latch Series 1x4 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. It features rugged thermal activated micro-mirror movements and latches to preserve the selected optical path after the drive signal has been removed.
1x2 MEMS Fiber Optic Switch
The MEMS Latch Series 1x2 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal.
1x4 Solid-State Fiber Optical Switch
The μs-series 1x4 solid-state fiber optical switch redirects an incoming optical signal into a selected output optical fiber. Switching is achieved through the Faraday Effect, using a patent-protected, all-crystal design.
2x2 Fiber Optic Switch
This 2x2 fiber optic switch is known for its performance and low insertion loss. It is suitable for OADM, OXC, system monitoring and protection.
2x2A Fiber Optic Switch
This 2x2A optical switch is known for its performance and low insertion loss. It is suitable for OADM, OXC, system monitoring, and protection, and can be integrated into high-density optical communication systems.
D1x2 Fiber Optic Switch
This optical switch meets demanding switching requirements with continuous operation and fast response time. The switch has built-in circulator and isolator functions, with an electronic driver available.
1x2 Solid-State Fiber Optic Switch
The 1x2 solid state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal.
Get Sourcing Help for Fiber Optic Equipment
Tell us your requirements and our experts will connect you with verified manufacturers.